stroke-linejoin
The stroke-linejoin attribute is a presentation attribute defining the shape to be used at the corners of paths when they are stroked.
The stroke-linejoin attribute is a presentation attribute defining the shape to be used at the corners of paths when they are stroked.
[!NOTE] As a presentation attribute,
stroke-linejoinalso has a CSS property counterpart: stroke-linejoin. When both are specified, the CSS property takes priority.
You can use this attribute with the following SVG elements:
- path
- polygon
- polyline
- rect
- text
- textPath
- tspan
Example
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 0 18 12" xmlns="http://www.w3.org/2000/svg">
<!--
Upper left path:
Effect of the "miter" value
-->
<path
d="M1,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="black"
fill="none"
stroke-linejoin="miter" />
<!--
Center path:
Effect of the "round" value
-->
<path
d="M7,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="black"
fill="none"
stroke-linejoin="round" />
<!--
Upper right path:
Effect of the "bevel" value
-->
<path
d="M13,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="black"
fill="none"
stroke-linejoin="bevel" />
<!--
Bottom left path:
Effect of the "miter-clip" value
with fallback to "miter" if not supported.
-->
<path
d="M3,11 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="black"
fill="none"
stroke-linejoin="miter-clip" />
<!--
Bottom right path:
Effect of the "arcs" value
with fallback to "miter" if not supported.
-->
<path
d="M9,11 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="black"
fill="none"
stroke-linejoin="arcs" />
<!--
the following pink lines highlight the
position of the path for each stroke
-->
<g id="highlight">
<path
d="M1,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3.5"
stroke="pink"
fill="none"
stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5.5" r="0.05" fill="pink" />
</g>
<use href="#highlight" x="6" />
<use href="#highlight" x="12" />
<use href="#highlight" x="2" y="6" />
<use href="#highlight" x="8" y="6" />
</svg>
100%
Usage notes
| Value |
arcs | bevel | miter |
miter-clip | round
|
|---|---|
| Default value | miter |
| Animatable | discrete |
arcs
[!NOTE] The
arcsvalue isn't widely supported yet.
The arcs value indicates that an arcs corner is to be used to join path segments. The arcs shape is formed by extending the outer edges of the stroke at the join point with arcs that have the same curvature as the outer edges at the join point.
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 0 6 6" xmlns="http://www.w3.org/2000/svg">
<!-- Effect of the "arcs" value -->
<path
d="M1,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3"
stroke="black"
fill="none"
stroke-linejoin="arcs" />
<!--
the following pink lines highlight the
position of the path for each stroke
-->
<g id="p">
<path
d="M1,5 a2,2 0,0,0 2,-3 a3,3 0 0 1 2,3"
stroke="pink"
fill="none"
stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5" r="0.05" fill="pink" />
</g>
</svg>
100%
bevel
The bevel value indicates that a beveled corner is to be used to join path segments.
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 0 6 6" xmlns="http://www.w3.org/2000/svg">
<!-- Effect of the "bevel" value -->
<path
d="M1,5 l2,-3 l2,3"
stroke="black"
fill="none"
stroke-linejoin="bevel" />
<!--
the following pink lines highlight the
position of the path for each stroke
-->
<g id="p">
<path d="M1,5 l2,-3 l2,3" stroke="pink" fill="none" stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5" r="0.05" fill="pink" />
</g>
</svg>
100%
miter
The miter value indicates that a sharp corner is to be used to join path segments. The corner is formed by extending the outer edges of the stroke at the tangents of the path segments until they intersect.
[!NOTE] If the stroke-miterlimit is exceeded, the line join falls back to
bevel.
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 -1 10 7" xmlns="http://www.w3.org/2000/svg">
<!-- Effect of the "miter" value -->
<path
d="M1,5 l2,-3 l2,3"
stroke="black"
fill="none"
stroke-linejoin="miter" />
<!-- Effect of the "miter" value on a sharp angle
where de default miter limit is exceeded -->
<path
d="M7,5 l0.75,-3 l0.75,3"
stroke="black"
fill="none"
stroke-linejoin="miter" />
<!-- the following red dotted line show where
the miter value falls back to the bevel value -->
<path
d="M0,0 h10"
stroke="red"
stroke-dasharray="0.05"
stroke-width="0.025" />
<!-- the following pink lines highlight the position of the path for each stroke -->
<g>
<path d="M1,5 l2,-3 l2,3" stroke="pink" fill="none" stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5" r="0.05" fill="pink" />
<path
d="M7,5 l0.75,-3 l0.75,3"
stroke="pink"
fill="none"
stroke-width="0.025" />
<circle cx="7" cy="5" r="0.05" fill="pink" />
<circle cx="7.75" cy="2" r="0.05" fill="pink" />
<circle cx="8.5" cy="5" r="0.05" fill="pink" />
</g>
</svg>
100%
miter-clip
[!NOTE] The
miter-clipvalue isn't widely supported yet.
The miter-clip value indicates that a sharp corner is to be used to join path segments. The corner is formed by extending the outer edges of the stroke at the tangents of the path segments until they intersect.
If the stroke-miterlimit is exceeded, the miter is clipped at a distance equal to half the stroke-miterlimit value multiplied by the stroke width from the intersection of the path segments. This provides a better rendering than miter on very sharp join or in case of an animation.
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 -1 10 7" xmlns="http://www.w3.org/2000/svg">
<!-- Effect of the "miter-clip" value -->
<path
d="M1,5 l2,-3 l2,3"
stroke="black"
fill="none"
stroke-linejoin="miter-clip" />
<!-- Effect of the "miter-clip" value on a sharp angle
where de default miter limit is exceeded -->
<path
d="M7,5 l0.75,-3 l0.75,3"
stroke="black"
fill="none"
stroke-linejoin="miter-clip" />
<!-- the following red dotted line show where the clip should happen -->
<path
d="M0,0 h10"
stroke="red"
stroke-dasharray="0.05"
stroke-width="0.025" />
<!-- the following pink lines highlight the position of the path for each stroke -->
<g>
<path d="M1,5 l2,-3 l2,3" stroke="pink" fill="none" stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5" r="0.05" fill="pink" />
<path
d="M7,5 l0.75,-3 l0.75,3"
stroke="pink"
fill="none"
stroke-width="0.025" />
<circle cx="7" cy="5" r="0.05" fill="pink" />
<circle cx="7.75" cy="2" r="0.05" fill="pink" />
<circle cx="8.5" cy="5" r="0.05" fill="pink" />
</g>
</svg>
100%
round
The round value indicates that a round corner is to be used to join path segments.
```css hidden html, body, svg { height: 100%; }
```html
<svg viewBox="0 0 6 6" xmlns="http://www.w3.org/2000/svg">
<!-- Effect of the "round" value -->
<path
d="M1,5 l2,-3 l2,3"
stroke="black"
fill="none"
stroke-linejoin="round" />
<!--
the following pink lines highlight the
position of the path for each stroke
-->
<g id="p">
<path d="M1,5 l2,-3 l2,3" stroke="pink" fill="none" stroke-width="0.025" />
<circle cx="1" cy="5" r="0.05" fill="pink" />
<circle cx="3" cy="2" r="0.05" fill="pink" />
<circle cx="5" cy="5" r="0.05" fill="pink" />
</g>
</svg>
100%
Specifications
Browser compatibility
See also
- CSS stroke-linejoin property